PLASMA TREATMENT

PLASMASTRA 3D+

IEEC is proud to introduce the PLASMASTRA 3D+, which is the latest innovation in the world of SURFACE TREATMENT. As at present Corona Treatment is meant for the treatment of films, foils or paper...but the PLASMASTRA 30+ targets all 30 solid objects for corona treatment.

This System is capable of treating Solid 30 objects of any site and form. IEEC PLASMASTRA 3D+ has the maximum face width of 90 mm, which treats larger surface area For example the system can treat a printing area of 90 mm in a single stroke, thereby saving energy and time thus resulting in cost saving. According to the need of application the system can be offered with a choice for face width of 30 mm, 60 mm, & 90mm.

In the past as also presently Flame treatment is used which requires one to monitor some parameters like air fuel ratio, distance between the flame and surface etc. If one of these go wrong then there are chances of the product being less or not treated or deformed. Also the flame treaters are expensive to run as they need CNG as fuel also the process may produce poisonous gases when the Plastic Objects are Flame Treated, there is a potential Hazard to the people working around.

Product installed on site